A small office network
One box, set up in a fixed order
Modem to WAN. New password and firmware. DHCP for PCs, fixed for printers.
Most small offices run on a single box. The modem from the provider plugs into its W A N port. The box itself is a router, a switch, a firewall, an access point and a D H C P server, all in one. Before anything else, change its default password and update its firmware. Wired devices plug into the L A N ports. Computers take an address from D H C P. A printer gets one that never changes. Then laptops and phones join over Wi-Fi.
A small office network · Going deeper
Setting up a SOHO router, step by step
Seven steps, from placement to testing.
Internet connections
Three arrive by cable, three by radio
Fibre, cable, DSL. Then cellular, wireless ISP and satellite.
There are six ways an internet connection reaches a building. Fibre: light in a glass cable. The fastest, and just as fast uploading as downloading. Cable: the television coaxial line. Fast, but shared with the street. D S L: the telephone line. It slows the further you are from the exchange. Cellular: four G or five G. A wireless provider: a fixed antenna pointed at a tower, which must be in view. And satellite, for places nothing else reaches.
Internet connections · Going deeper
Connection types compared
A geostationary satellite adds about half a second.
Check yourself
Which connection fits this site?
Network types
PAN, LAN, MAN, WAN: named by how far they reach
PAN is metres, LAN a building, MAN a city, WAN the world.
Networks are named by their reach. On this scale, each mark is ten times further than the last. A P A N, a personal area network, covers a few metres: your phone and your headset. A LAN, a local area network, covers an office or a building. A MAN, metropolitan, covers a city or a campus. And a WAN, a wide area network, crosses countries. The internet is the largest one.
Network types · Going deeper
Network types, with WLAN and SAN
A WLAN is a wireless LAN. A SAN is for storage.
Making a cable
Strip, crimp or punch down, then test
Stripper, then crimper or punchdown tool, then cable tester.
A technician makes and repairs network cables, with four tools. A cable stripper takes off the outer jacket, without nicking the wires inside. For a patch cable, a crimper presses a plug onto the end. For a cable that runs inside a wall, a punchdown tool pushes each wire into its slot, in a wall jack or a patch panel. Either way, finish with a cable tester. It checks that all eight wires connect, and in the right order.
Making a cable · Going deeper
The eight tools
Toner probe, loopback plug, Wi-Fi analyzer, network tap.
Check yourself
Which tool finds the right cable?
Diagnostic tools
Each tool answers one question
Toner probe traces, loopback plug tests a port, analyzer shows the air, tap listens.
The other four tools each answer a question. Which cable in this bundle goes to that wall socket? A toner probe. It sends a tone down the wire, and a probe finds it at the far end. Is this network port working at all? A loopback plug. It feeds the port's own signal back into it. Which Wi-Fi channels are crowded? A Wi-Fi analyzer. And what is really travelling along this link? A network tap, which copies the traffic so you can study it.
Diagnostic tools · Going deeper
Clue words for connections, network types and tools
Fibre, SAN, crimper, toner probe.
Check yourself
Which tool should the technician open first?
Lesson complete
You finished “Small office networks and network tools”
Answer the questions along the way to see your score here.